iPad glass replacement cost. Where to replace the glass on an iPad Apple Service Center - device service

Mobile and computer devices often require replacement of external elements. It is for these reasons that iPad users most often turn to repair shops. Among the most common tablet breakdowns are cracks in the case, broken glass, problems with the touchscreen and many others. All these problems are caused by physical influences.

This article will discuss one of these breakdowns. Let's talk about the reasons why the glass on the iPad 3 is damaged, and how the iPad 3 glass is replaced.

Why does the touchscreen sometimes fail and the glass on the iPad needs to be replaced? Most often, breakdowns of these elements are caused by mechanical damage. After a fall or impact, problems with the touchscreen often appear, and chips and cracks appear on the body of the device. In this case, the display, as a rule, loses its former sensitivity.

It is necessary to change a device element such as glass if there are problems with response to touch or if it is completely absent.

Individual components of the touchscreen may break, which, with careful handling of the gadget, could stand and work normally for many months. But when the screen on an iPad 3 hits, the touchscreen usually breaks as well. For those who are not in the know, let us clarify: the screen and touchscreen are in close contact, so if one of these elements fails, the second one must also be replaced.

Features of replacing glass on iPad 3

How do professionals in a repair shop do this procedure? To begin with, the device is completely disassembled and the touchscreen is carefully disconnected.

Then the new glass element is glued and the functionality is checked.

Please note that, if possible, it is better to carry out such repairs in a workshop. An experienced specialist will quickly complete everything necessary, using original elements. At the same time, you will not need to worry about the future fate of the gadget, because all work will be guaranteed.

For craftsmen, such repairs are a standard operation. But for a beginner this can be fraught with many problems. But if you decide to replace your iPad glass at home, remember the following. All elements in the device are in close contact with each other, so you need to act as carefully as possible. If you damage one of the fragile parts, it can cause serious damage. Then the cost of repairing the device will increase several times.

By the way, many people are interested in how much it costs to replace the glass on an iPad. This type of repair is not cheap. On average, it will cost 3,000 rubles.

When iPad glass needs replacement: symptoms

In addition to visible violations of the integrity of the display, the need to replace the glass or the entire screen module may be indicated by the following reasons:

“Broken” pixels, stains, stains and other damage that interfere with the normal operation of the device.
Lack of response to finger touches of the entire screen or part of it.
Inappropriate reactions from the operating system. For example, when programs open themselves, without user commands, some functions are activated spontaneously, and the like.

If one or more oddities in the behavior of your gadget listed above have been discovered, do not delay repairs. During the diagnostics, the technician will necessarily perform the following actions:

Remove the necessary parts of the case, being careful not to damage the internal parts.
Conducts a test to determine the performance of all elements and components.
Will identify the problem and select the necessary components.
Will carry out repairs and debugging work.
It will replace the glass, correctly reconnecting all the elements of the case.

Agree, all this work is not easy. Therefore, it would not be amiss to remind you once again that, in the event of a serious breakdown, it is better not to take risks and give your iPad into the hands of a specialist.

Replacing glass on an iPad: risk factors

Significant mechanical impact and damage to the integrity of the gadget’s body can cause depressurization processes and the penetration of moisture and small dust particles into the iPad. This can lead to short circuits in the electrical circuit and failure of many parts. All this will significantly increase the cost of repair work.

Among the most serious complications:

Malfunction of the Home button or Touch ID mechanism.
Chambers are clogged or damaged.
Failure of batteries, processor, system board and other elements.
Problems with the speaker or microphone. Control buttons.

Let us remind you that any repair of Apple products requires certain knowledge and skills in handling equipment. This also applies to replacing iPad glass. Therefore, contact only certified workshops. Often small service centers attract customers with the low cost of services. But by taking your gadget there, you are dooming it to poor quality repairs and possible breakdowns in the future. In addition, it is unlikely that high-quality original parts will be installed in your device. Most likely, these will be Chinese fakes.

But if you have previously dealt with the repair of Apple equipment. You can try replacing the glass yourself. Our instructions will tell you how to do it correctly.

Replacing glass on an iPad at home

Of course, the work ahead will not be easy. Moreover, this is a very expensive business, since you will need to purchase special devices:

Hairdryer that regulates heating temperature.
Plastic cards or mediators (several pieces).
Double-sided thermal tape.

But we note that it is not necessary to buy all this. It is enough to have “straight hands”. A technical hair dryer can be completely replaced with a regular household hair dryer. Feel free to use superglue instead of thermal tape. But keep in mind that all these replacements may negatively affect the outcome. Using a hair dryer without a thermostat can damage the antenna or camera module. What can result from inaccurate application of glue is not worth talking about. But the decision about whether to save or not is still up to you. Now let’s proceed directly to the procedure for replacing the glass on the iPad.

The algorithm of actions will be as follows:

1 Turn off the tablet. Set the hair dryer to 200 degrees. 2 Move the hairdryer near the frame. Make movements from top to bottom, starting from the power button. This point is extremely important to take into account, because at the bottom, next to the “Home” button, there is an antenna, and at the bottom there are cables from the matrix and glass. The screen should not be touched, since the glue that holds the glass in place is in the frame. 3 Using a plastic spatula or mediator, try to lift the edge of the glass. If possible, leave the card in this position and move to another place in the frame. Each unglued area must be pryed with mediators. 4 Carefully remove the glass, being careful not to damage the cable on the left. 5 Unscrew the bolts holding the matrix (4 in total). Lift this part using the card and place it to the left. The main thing here is not to harm the train. 6 Disconnect the touchscreen and matrix cables. 7 Remove the “Home” button from the old glass by unscrewing 2 bolts and the plate under the front camera. 8 Install the new glass element, not leaving the cables unattended. 9 Apply adhesive tape along the borders of the frame. Unfasten its top layer and attach the display to the base of the gadget’s body. 10 Bring the hair dryer to the desired temperature and heat the borders of the frame so that both parts are firmly fixed with adhesive tape. 11 Place something heavy (for example, a thick book) on top of the touchscreen. Wait 30-40 minutes. This is done for this purpose. So that both parts stick together well.

That's it - your iPad is updated. As you can see, the procedure is not easy. And the process itself takes a lot of time. But it's worth it, because this way you can save a lot of money.

When the owner accidentally breaks the glass of an iPad, we do not recommend delaying the solution to this problem. The longer the iPad remains inoperative, the more difficult and expensive it will be to repair it. Our service center specialists can quickly and efficiently replace the glass on your iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro, and even if your iPad 3 glass is cracked, we can help.

Despite the fact that the screen is quite reliable, you should not expose it to negative mechanical stress, which, of course, is quite difficult to avoid. How to identify faults? It’s quite simple - it happens that the glass on the iPad is cracked, cracks appear on it, the touchscreen does not respond to touches, etc. If a user breaks the glass of an iPad 3 and 2, do not get upset and throw away the equipment. Our workshop will definitely help you. We will repair your iPad glass quickly and professionally.

Important: Promotion! Reduced price by 50% marked with the word “Promotion”, valid until the end of this month 1. As a spare part for an iPad from a copy; 2. We install original spare parts and provide a 1-year warranty! 3. 20-50% discount at the request of regular customers - see special 4. When repairing, choose free									Price installation details in our service center:
Name of spare parts	iPad 4, 3, 2	iPad Air	iPad Air 2	iPad mini 1.2	iPad mini 3	iPad mini 4	iPad Pro 9.7	iPad Pro 12.9	Price installations in rub.	Repair time without pressure testing (with pressure test + 4 hours)
Touch glass (original)	1980 Promotion! Promotion until Sunday	2990 Promotion! Promotion until Sunday	3900 Promotion! Promotion until Sunday	2790 Promotion! Promotion until Sunday	2950 Promotion! Promotion until Sunday	4900 Promotion! Promotion until Sunday	5900 Promotion! Promotion until Sunday	6900 Promotion! Promotion until Sunday	600	40 minutes
Display (original)	2890 Promotion!	3450 Promotion!	7900	2840 Promotion!	3400 Promotion!	8900	11900	12900	600	40 minutes
Touch glass (copy)	790	1190	1190	1390	1390				600	40 minutes
Home button (body part)	980	980	980	980	980	980	980	980	600	40 minutes
Home button (inner part: cable with components)	860	860	860	860	860	860	860	860	600	40 minutes
Volume button cable, power button	970	970	970	970	970	970	970	970	600	1 hour
Headphone cable	860	860	860	860	860	860	860	860	600	1 hour
SIM card cable	880	880	880	880	880	880	880	880	600	2 hours
Speaker	1280	1280	1280	1280	1280	1280	1280	1280	600	2 hours
Microphone	1190	1190	1190	1190	1190	1190	1190	1190	600	2 hours
Antenna	260	260	260	260	260	260	260	260	600	2 hours
Battery Promotion!	1980	1980	1980	1980	1980	1980	1980	1980	600	3 hours
Large iPad camera	860	990	990	990	990	990	990	990	600	40 minutes
Camera small iPad	790	990	990	990	990	990	990	990	600	40 minutes
Power connector with cable	1300	1300	1300	1300	1300	1300	1300	1300	600	40 minutes
Power connector	1280	1280	1280	1280	1280	1280	1280	1280	600	40 minutes
WiFi antenna	800	800	800	800	800	800	800	800	600	40 minutes
Wi-Fi module	1500	1500	1500	1500	1500	1500	1500	1500	600	from 2 hours
Power management chips	2290	2390	2390	2390	2390	2390	2390	2390	600	from 2 hours
Pad	800	800	800	800	800	800	800	800	600	40 minutes
Back cover (case) Promotion!	2985	2985	2985	2985	2985	2985	2985	2985	1200	from 2 hours
Sim reader	890	890	890	890	890	890	890	890	600	2 hours

Become our regular customer and get a discount on our special.
Service center services
Installation of modules and components: display, speaker, case repair, etc.				from 100-900 rub., from 20-50 minutes
Installation of radio elements: capacitor, diode, transistor, varistor, etc.				from 50-900 rub., from 1 hour
Restoring the printed circuit board (without replacing radio elements)				from 200-800 rub., from 1 hour
Installation of microcircuits, controllers, etc.				from 600 rub., from 1 hour
Recovery after moisture ingress				from 900 rub., from 1 hour
Firmware				900 rub., 40 minutes.
Diagnostics and troubleshooting are free!

What will the cost of repairs be?

If, for example, the glass of an iPad 2 is cracked, first of all we will conduct a comprehensive diagnostics of the device in order to make sure that the internal components have not been damaged. This service is absolutely free for our clients. If no problems are found with the hardware, then the technician will be able to change the glass on the iPad as soon as possible, since we have a huge warehouse of original spare parts. We also sell parts throughout Russia, which is why our prices are the lowest.

You should not repair the device yourself or repair the glass of the iPad 3 and 2, as this can only damage and damage other working parts. In our service center, only highly qualified specialists will deal with it, who have extensive experience in qualitatively replacing the glass on iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro and will easily solve any of your problems. Upon completion of any repair work, the user must receive a full warranty for the entire device, and not just a warranty for the replaced part.

After our repair, your iPad will work and will not break in the future!

For this purpose we have developed a special guarantee. After we have to replace the glass on the iPad, the technicians will definitely test the functionality of the new component and the mechanism as a whole. This is done using professional equipment. Based on its results, the user can be absolutely sure that WiFi 3G will function like new.

How long will it take to repair and replace glass on iPad 3 and 2 and other models.

Due to the fact that we have close to 99% of original spare parts in stock, specialists will be able to change the glass on the iPad 2 in the shortest possible time. If the iron is not damaged, it will take from 20 minutes to 2 hours, depending on the nature of the damage.

Typically, replacing the front glass of an iPad 3 and 2 is a simple task. Our main principle is not only to fix the breakdown, but also to make sure that in the future everything functions as in a new tablet. Testing takes very little time - only from 5 to 30 minutes, depending on the model. If your iPad Wi-Fi 3G fails, we will definitely fix it. Our professionals will repair Apple iPad 3G Wi-Fi 64gb/32/16.

Example from life:

The girl accidentally dropped the device on the asphalt, as a result of which the glass of the iPad broke. She went to our service center for help. First of all, specialists carried out a full diagnosis and determined that the internal components were not damaged. Replacing the display took only a few minutes. After the equipment was tested, the girl was given a full guarantee for the entire device.

Cracks and chips in the display can cause damage to the matrix, so replacing the iPad glass should be done as quickly as possible. And although this is not a very difficult task, it is still not worth doing it yourself, as this can lead to even more serious malfunctions. It is better to contact an experienced specialist who repairs Apple gadgets (iPhone, iPod, iPad, including Mini and Pro models). You can easily find the right technician who can go to your address using the Yuda service.

How is iPad glass repair performed?

Replacing the screen protector on your iPad Mini or Pro is much easier than replacing your iPhone. This is due to the fact that in tablets there is no need to remove the entire touch module - it is enough to simply change the protective glass that is cracked. To do this, the specialist performs the following tasks:

full device diagnostics
disassembling the tablet
removing the display
detaching cracked protective glass
installing a new original part on your iPad 2 or 3
device assembly

It takes an experienced technician one hour to replace the glass on an iPad 2 or 3 (as well as Mini, Pro models), iPods and other gadgets. At the same time, you do not have to wait long days and weeks to receive your tablet after repair.

Why is it convenient to order a gadget repair from a private technician?

Replacing iPad parts is more profitable from a private trader, since it has several obvious advantages:

short time frame for repair and replacement of glass - a couple of hours will be needed to replace parts on the device that you broke (iPad models 2 and 3, as well as Mini, Pro modifications)
urgent departure to your address without additional payment - many specialists work seven days a week and around the clock, so they can change parts at any time convenient for you
confidence in the quality of the repair of the device that you have broken - the repairman can replace parts with the same originals right before your eyes
low prices - you can change any part inexpensively, much cheaper than in certified offices

Our specialists are highly qualified to perform work of any complexity with Apple gadgets – iPad, iPhone, iPod – in the shortest possible time and at a high-quality level. We accept a variety of modifications for service - all lines of iPads and iPods (Mini, Pro, etc.), as well as iPhones of various models. In addition, our specialists have certificates that give them the right to service Apple equipment.

How much does it cost to replace iPad glass?

If the glass of your iPad tablet is broken, you can order device repairs at low prices through the Yudu website. The cost will depend on what specific tasks you set for the specialist:

Replacing cracked glass only
high-quality iPad glass replacement services and full diagnostics of devices that are broken
maintenance - not only fix the breakdown, but also perform flashing

Typically, the service can be obtained inexpensively, even taking into account a specialist visiting your home and installing original parts. If you want to save money, you can replace the original with a licensed part, but the cost of the specialist’s work itself will not change. You can find out how much it costs to change the glass on an iPad directly from the specialist you have chosen.

Cooperating with private craftsmen is profitable, since the cost of restoring and repairing a Mini or Pro tablet only includes the price of spare parts and the direct work of replacing the part that is broken.

Where can I order inexpensive iPad repairs?

You can order glass replacement services for your iPad at a low price in Moscow through the Yuda service. You can order the services of a specialist in a short time with a visit to your home in Moscow, and you do not have to look for the addresses of service offices on the Internet. Our contractors will provide a cheap and quick service for replacing spare parts. Replacing the glass on your iPad will be done efficiently and within the time frame specified by the specialist.

iPad glass replacement is carried out in our service center by highly qualified technicians with over 5 years of experience.

If you need glass replacement on your iPad in Moscow, the most efficient, inexpensive and painless way to do this for the future electronic life of your tablet is to contact Mac Pro. Our specialists have performed a similar “operation” countless times, acquiring the experience and skill that guarantee successful iPad glass repair in your particular case. All work is performed exclusively using professional equipment, all parts to be replaced are always in stock, and upon completion of the repair a guarantee is issued.

iPad glass replacement cost

Select your model to determine glass replacement cost

All prices are indicated in Russian rubles. The price includes glass and glass installation service.

Replacing glass on an iPad - repair features

No matter how experts from Apple are masters of their craft, and the iPad itself is a masterpiece of engineering, it is, of course, impossible to protect the tablet from all vicissitudes and breakdowns. Broken glass or various chips, cracks and scratches, as a result of which the glass on the iPad needs to be replaced, is the most common reason for contacting repair shops. According to Apple itself, which we have no reason not to believe, the glass of the tablet, made using a special technology, is particularly durable and should painlessly withstand more than two hundred million user clicks. So if the screen is “decorated” by a dense network of cracks, or even just a small chip, this was due to careless handling of the tablet.

There are several options for possible damage, after which the glass on your iPad will need to be replaced. The most successful fall can be considered flat, after which one large crack in the screen forms. Replacing the glass in this case will not be difficult. More complex cases are various cracks closer to the corner of the body, because When removed, the glass begins to crumble, making the work and “life” of the repair specialists more difficult. The most unpleasant damage is associated with both broken glass and various violations of the geometry of the case. In this case, as is not difficult to understand, in addition to replacing the iPad glass itself, you will also need to replace or restore the case, which will affect both the complexity of the repair and its cost.

It is known that all Apple products always come with very high quality assembly. If we talk about tablets, then users extremely rarely encounter the problem of a non-working touchscreen. The same can be said about other difficulties that could result from poor design.

In this article we will talk about sensor problems that do sometimes occur. This element may not work completely or some of its functions may partially fail. In any case, this will result in a lot of inconvenience for the user, for example, the glass on the iPad 2 will need to be replaced.

Typically, iPad glass failures are serious. But in some situations, you can replace the glass on your iPad 2 at home. This material contains step-by-step instructions on how to perform this procedure correctly and without negative consequences for the device. First, let's look at the causes of breakdowns and their manifestations.

Most often, the display does not work for the following reasons:

1 Liquid has entered the housing. And sometimes a few drops are enough. The device does not necessarily have to fall into the water and lie there for a long time. The fact is that the proximity sensor is located on top, next to the earpiece hole. In general, trouble can happen even during rain if the user was talking at that moment. 2 The device fell or there was a strong blow to the body for another reason. The display may be completely intact. But the proximity sensor placed near the touchscreen may stop working normally. In such cases, the screen usually continues to light up during a conversation. 3 If the glass was replaced not by a specialist, but by an amateur. For example, the owners of the device themselves, who decided that he would cope with the task himself. But at the same time, the features of a specific tablet model were not taken into account, the device was assembled incorrectly, and the like. After this, the sensor mentioned above may stop working even if the loop is operational. 4 After replacing the locking element. The physical button is always replaced along with the cable. However, the display may stop going dark if the filter on the sensor has not been replaced.

As can be seen from the above list, there are a lot of reasons for breakdowns. Therefore, it is better not to even try to carry out repairs yourself. Especially if you have no experience and skills in handling equipment of this level. It is better to immediately go to a repair shop, where a specialist will first diagnose the breakdown. And only after this can you prescribe procedures and make repairs.

What to do if the sensor on the iPad does not work?

If malfunctions appear regularly, but the touchscreen works, albeit intermittently, you need to try rebooting the device. This can be done in the following way:

pressing the power and home buttons at the same time;
holding these elements for 15-20 seconds;
the device will reboot;
If Apple symbols appear on the display, everything went well.

Also, if the device screen is protected by an appropriate film or bumper, you need to remove them and test the functionality of the smartphone again. Perhaps the cause of the malfunction was precisely the use of these accessories.

If the owner of the tablet has done everything mentioned above, but the device cannot be revived, you should think about visiting a repair shop.

Preparation

If a user decides to replace glass at home, he will have to purchase this list of materials:

several screwdrivers;
adhesive tape;
a metal spatula, as thin as possible.

It is advisable to disassemble the device on a table with an antistatic coating. If this is not possible, you need to wear gloves with appropriate properties. All equipment, including tablets, react to this type of electricity. Therefore, without taking into account the safety rules, there is a risk of damage to the device. Then you will need to replace not only the glass, but also the board elements.

But it should be remembered that any wrong step can lead to serious damage to internal parts. All the tablet parts that make up the “filling” are very fragile. Then expensive repairs cannot be avoided. Therefore, before deciding to have the procedure at home, you should think it over many times.

Instructions for replacing the touchscreen

The sensor fits tightly and quite tightly to the gadget. Therefore, to remove the display, you need to warm it up with a hairdryer. In this case, the temperature should be no more than 200 degrees, otherwise the plastic frame near the wheelbarrow will melt. Warming up should be done with caution near the “Home” element to prevent it from melting.

1 To remove the glass, use a thin metal spatula to pick it up. The tool must be placed between the body and the glass. In this case, you need to continue heating over the entire area, moving the spatula itself along the same trajectory. If you lift the element while it is not heated, it will crack. 2 When the touchscreen is disconnected, you need to lift it up and put it down. Now you need to remove the display - there is no other way to connect the sensor cable. To do this, you first need to remove the remaining fragments from the screen. 3 Disconnect the touchscreen from the system. To do this, remove the cable located under the display. If the element is to be replaced, the tire can be cut off for convenience. 4 We begin to remove the display. We unscrew the 4 bolts that we find in the corners of the device. 5 We remove the screen back. Everything must be done with care so that nothing breaks. Prying with a screwdriver is strictly prohibited. Otherwise the element will crack. We pull the “ear” and lift it up. 6 Disconnect the display cable. To do this, lift the clasp and pull. The display can be put aside for now. 7 We disconnect the cable of the wheelbarrow itself and remove it. 8 Using a thin tool, we clean off the remaining glass and adhesive mass, again heating it around the entire perimeter. Previously, this was not worth doing, since small pieces of glass could fly onto the screen and damage it. You can simply remove the fragments from inside the gadget. 9 Remove the button from the damaged wheelbarrow. This element is also glued. Therefore, warming up followed by removal with a thin instrument will be required. You need to work very carefully so that the plastic does not float. 10 Remove the metal plate located around the perimeter of the camera. It is also heated, and only after that can it be removed.

The spatula or other similar element must be the thinnest so that the touchscreen does not get damaged even more and does not cover the screen with fragments. A number of craftsmen use plastic spatulas. But such material can easily melt if the permissible temperature is exceeded.

If the display has not been broken and does not need to be replaced, but you just need to get inside the case, you should act especially carefully. After all, you can easily damage the train. If you position the tablet so that the Home element is on the left side, the bus will be in the top left corner. If it breaks, the sensor will also need to be replaced.

Installing the display and assembling the device

Now let's get down to the most important thing - installing a new part on iPad two, Air or another tablet model. To do this, perform the following steps:

1 Place a metal plate on the new touchscreen of the gadget. It should be covered with a sufficient amount of adhesive mass, which can be heated, and then the element can be attached. If there is not enough glue, you need to resort to using adhesive tape. The plate must be attached correctly so that the camera hole falls strictly in its center after assembling the device. 2 Glue the button element. Here it is important to observe a proper arrangement so that the square rushes straight forward and is not shifted somewhere. 3 Tape along the entire border. Then you can start assembling. In essence, all the steps are similar to those that were performed when disassembling the case. The touchscreen is placed first, because if the display is placed first, connecting the sensor cable will become impossible. And only then do we install the display. Everything should be in its place and assembled in the correct sequence. 4 We perform a performance check. The glass must respond to touch, and the display must display the image correctly. After double-checking that everything is fine, you can begin assembly. It is important to thoroughly clean the display from small debris, hairs and other debris before using it. Otherwise, after assembly, it will not be possible to remove them a second time.

Remove the base of the adhesive tape and glue the touch. This completes the procedure. Please remember that iPad 2 repairs and glass replacement should only be carried out by someone with specific knowledge. It just seems that replacing the glass on an iPad Air 2 or any other tablet model is a simple operation. In fact, the element being replaced is easily damaged, just like other parts. Therefore, you need to weigh everything and, whenever possible, take iPad 2 to a workshop to change the glass. Of course, replacing a touchscreen is not cheap. For example, in Kazan and other large cities, replacing a sensor will cost 3,000 rubles or more.