Htc desire 516 does not turn on at all. The phone does not turn on beyond the screensaver

Sometimes smartphone owners are faced with a situation where the device does not turn on in the usual way. This problem also affects happy owners of devices from the Taiwanese company HTC.

Possible reasons why the smartphone may not turn on There may be several reasons why the communicator does not respond to pressing the power button. Experience using HTC devices shows that sometimes the smartphone may not turn on as a result of the battery being completely discharged.

The next possible reason why problems may arise with device activation is a malfunction of the operating system. Another circumstance that may make it difficult to get the device into working condition is damage to the hardware components of the communicator. The above reasons can be considered the most common. Eliminating problems that lead to the inability to turn on the smartphone In a situation where the smartphone cannot be turned on in the usual way, the first thing you should do is remove the battery for 2-3 minutes and insert it back. After this, you need to hold down the power button for a few seconds. If the battery is not removable, you still need to do the same with the button. Sometimes just this simple action may be enough to solve the problem. If pressing the button for a long time does not produce results, you can proceed to the next step. You need to make sure that the battery has enough charge left to operate the communicator. To do this, you need to connect your smartphone to the mains using the original charger that you purchased the device with. After which it is advisable to leave the smartphone on charge for some time. The best option is at least 30 minutes. Then you can try to turn on the communicator again. If after these manipulations the smartphone still refuses to turn on, you can try resetting the communicator to its factory state. This procedure resets the operating system settings and deletes all user data. Thus, after resetting the settings, the system will return to the state in which it was when the smartphone was first turned on. No personal data previously downloaded by the user will remain on the device. If the smartphone cannot be started due to a software glitch, resetting to factory settings will most likely help solve this problem. The procedure can be done using the device's hardware buttons. Detailed instructions for performing a reset for different models of HTC communicators can be found on the company’s official website: http://www.htc.com. In cases where even resetting to factory settings does not help to “reanimate” the smartphone, there is a high probability of damage in the hardware parts of the device. In such situations, it is better to contact the service center employees.

Phone recovery phone/smartphone HTC model desire c on the Android 4.0 operating system with a color screen, 16.78 million colors - 320x480 dpi made of brick. A modern mobile phone is such a complex thing that it is better not to delve into its insides unless necessary.

It happens that, due to ignorance or carelessness, after an unsuccessful flashing or software change, the phone does not turn on and is blocked. In this condition, the HTC phone/smartphone model desire c on the Android 4.0 operating system with a color screen, 16.78 million colors - 320x480 dpi called "brick".

It’s clear what to do with a brick, but what to do with such a phone? How to revive it and start it? Of course, there is no universal remedy; for each model HTC desire v, one m8, one m7, one m9 and other models, there are recovery methods phone.

Errors on the phone, how to turn on the HTC one a9, 626, desire 816. Restoring from a brick state.

Information on how to restore HTC desire 300, desire 600 dual sim, eye, HTC desire 820, one e9, desire 326g phone after flashing or from a locked state, or when the phone does not turn on, you can read on specialized forums and websites.

Carelessness or error when flashing the firmware of the HTC phone/smartphone model wildfire s on the Android 2.3 operating system with a TFT screen - 320x480 dpi.

If you did something unhealthy to your HTC desire 326g, one plus, sense phone, and after that it stopped loading at all and won’t let you into recovery, FTM, or fastboot, then don’t despair. There is one more remedy left:

Restoring dead HTC phones that won't turn on at home.

- recovery of HTC phones after unsuccessful firmware. The description posted on the site uses the so-called Jag method. The essence of the method is that it is necessary to make a special Jag plug by soldering contacts (4 and 5) together through a 301 kOhm resistor. This Jag is inserted into the HTC desire v Super LCD - 480x800 dpi phone with the battery removed. More details on how to restore your phone this way are described here.

Restoring your HTC phone to working condition.

- for phone owners. You can view a list of all supported devices, such as the HTC one m8 phone, color Super LCD 3, touchscreen - 1920x1080 dp and others. Motorola FAQ on phone recovery is posted at the link above. The site also provides a description of how to restore a phone by closing the contacts when the battery is removed.

Before restoring the phone, you need to download and install a special program on your PC: Random's Developments Flash&backup. Next you need to: remove the battery, connect pins 4 and 5 on the phone connector (see photo), keeping the needles closed, insert the battery, open the needles , insert the cord into the connector and connect it to the computer, a message should appear in the Random's Developments Flash&backup program that the HTC one m7 color Super LCD 3, touchscreen - 1920x1080 dpi is connected.

Restoring an HTC phone from a brick state.

- this method of restoring HTC desire hd, 626g dual sim, incredible s phones of different models, different manufacturers. When restoring an HTC desire 700, g, 620 phone, special software is used: a standard flasher from MTS, a programmer from ZTE and a HEX editor. A detailed description with screenshots of the actions is posted on this page of the site (see link).

Restoring an HTC phone using the SEMCtool program.

- these instructions are for restoring some HTC models. Symptoms of failure: HTC desire 210 dual sim, desire 620g dual sim, 510 hangs on “Please wait”, flashes white display, no network signal, no connection via DCU-60, neither via “C” nor via “2+5” . The method for restoring HTC one m9 phones color Super LCD 3, 16.78 million colors, touch - 1920x1080 dpi posted on this site is using a service cable, together with SEMCtool v8.7 software, which can be downloaded for free on the same site.

Restoring a water-damaged HTC cell phone that was drowned.

- instructions with pictures on how to restore an HTC desire 400, 816g, one max phone after it falls into water. In order to prevent corrosion of the phone elements of the HTC one a9 color AMOLED, touchscreen - 1920x1080 dpi, you need to very quickly remove it from the water and remove the battery. Then the case is removed and the phone is placed in a jar filled with rice for two days. The fact is that rice absorbs moisture very well and is an excellent absorbent. Ordinary homemade rice will draw out all the moisture from the smallest components of the HTC mozart, radar, one e8 phone, and also prevent corrosion. You can use cat litter as an absorbent at home.

How to resolve "Operation Error" in Java on HTC phones.

- instructions for users of HTC desire 526g dual sim, butterfly, desire 310 dual sim phones who have problems installing applications or games on their phone. If, when entering the application/game folders, the message “Error during operation” pops up, this means that the Java machine on the HTC 626 color Super LCD, touchscreen - 1280x720 dpi phone has crashed. This problem can be resolved by simply removing and inserting the memory card into the phone. If this does not help, more complex actions will be required. To restore the functionality of the Java machine, you will need to reflash the firmware FS file and finalize it. More details on how to do this are described in this article.

How to turn on your HTC phone.

To turn on the HTC 516 dual, desire 616 dual, 820g touch phone, you must do the following:

Press and hold the Power key until the phone vibrates.
- If the phone was turned on, but the screen went dark, press and release the Power key to turn it on.
- an image of a lock will appear on the screen; to unlock the screen, drag the lock icon or click on it.
- when prompted to enter a code, enter the PIN code from your SIM card. In most cases this is 0000 and click OK.
- wait for the phone to start.

Note: The PIN code for the SIM card is located on a plastic card or in a package received when purchasing a SIM card at a mobile phone store. But be careful, if the PIN code is incorrect three times, you can activate the SIM card only through the PUK code, which is also included in the package received when purchasing the SIM card. If the PUK code is lost, it can only be restored using the passport of a citizen of the Russian Federation for which the SIM card is issued. Therefore, do not enter your PIN incorrectly more than three times. If you have lost your PIN code and there is no way to recover it through your telecom operator, you can do the following.

Cancel the PIN code prompt when you turn on your HTC 601 dual, desire 500 dual sim, sensation. To do this, find another SIM card with a PIN code you know (you can assign a PIN code in the settings) and insert it into your phone. Turn on the phone according to the steps described above, when entering the password, enter the PIN code you know from another SIM card. Having successfully turned on the phone, go to the phone settings and cancel the request to enter a PIN code when turning on the phone HTC desire 816 color, touch - 1280x720 dpi. Having done this, turn off the phone and change the SIM cards. Now, when you turn on the phone, the system will not require you to enter a PIN code.

This is, of course, elementary advice, but there are solutions to more serious problems.

Advice. The SIM PIN is initially provided by your network operator, but can be changed in the Settings menu. To correct an error when entering your SIM card PIN, tap the “Delete” icon.

HTC phone won't turn on! Error during phone self-test

The very first thing you need to do is try to reflash your HTC windows phone, hd2, one tab. But the problem of the phone not turning on can be not only due to “crashed” software, but also due to a breakdown of the phone’s on/off button, breakdown or failure of the battery - charger, etc.

HTC phone won't turn on. What to do?.

- a very detailed description of how to fix the problem HTC jetstream phone, flyer 3g 32gb wi fi, evo view 4g does not turn on, how to turn on the phone. The article is divided into points, with a solution to each problem point by point: checking the power source - the battery, the power button is faulty, the power button circuits, the power controller or its soldering is broken, secondary power sources - power supply to the processor, memory, etc. devices, setting up mobile phone software HTC desire 816 color, touch - 1280x720 dpi.

Instructions for restoring a phone HTC desire 300 on the Android 4.1 OS platform on a screen with a resolution of 800x480, color, touch type from a non-working state - brick More details on how to restore the device, turn on the touch HTC one x, one s, desire c, wildfire s, desire v, one m8, one m7, one m9, one a9, 626, desire 816, desire 300, desire 600 dual sim, eye, sensation xe, desire 820, one e9, desire 326g, one plus, sense, desire hd, 626g dual sim, incredible s, desire 700, g, 620, desire 210 dual sim, desire 620g dual sim, 510, desire 610, desire 400, 816g, one max, mozart, radar, one e8, desire 526g dual sim, butterfly, desire 310 dual sim, 516 dual, desire 616 dual, 820g, 601 dual, desire 500 dual sim, sensation, desire x, one v, 8s, desire sv, windows phone, hd2, one tab, jetstream, flyer 3g 32gb wi fi , evo view 4g, p510e, one x and what to do if your cellular smartphone does not turn on.

Popular reviews on HTC

	Cuts launch quickly on the phone and do not take up much space in the phone's memory.
	You can learn more about how to Download HTC music for free here; to do this, follow the link above.
	The social network vk.com is the most visited network in our country. Initially, you could only use the network on a computer; 10 years ago there were no phones with a touch screen, much less HTC tablets.
	Next, you can find and read about the design of an HTC cell phone and its main functional components. Next, you can find and read about the design of an HTC cell phone and its main functional components. Find mobile device diagrams. Learn the operating principle of a mobile device and the operation scheme of the GSM channel.

The Htc One V smartphone offers ample opportunities in sound, image, and functions. Even in poor lighting conditions, photographs are obtained at a high level of quality. With Beats Audio, the sound is deep and natural, with subtle nuances and tones. The body of the device is curved at the bottom, which is comfortable for the hand; the phone weighs only 115 grams.

The smartphone is based on the Android™ 4.0 platform with the HTC Sense™ interface. Has a total memory of 4 GB. The excellent characteristics of the gadget guarantee stable operation, but there are still cases of failure. Such breakdowns are especially typical in case of accidental falls, liquid ingress, mechanical damage (impacts, squeezing, etc.).

If your phone is dead and won’t turn on, you can try to help it yourself, without involving a service center.

Typical signs of HTC one (V, X, S, dual sim, mini) malfunction that you can fix yourself:

1) The phone is not charging. This is the case when the battery appears to be faulty. You can try charging via a computer.

2) One of the reasons for failure to charge may be a malfunction in the charger, such as a broken conductor or lack of contact. This defect can be determined visually during inspection. You will have to buy a new charger; it is not always possible to use a faulty one; in addition, the repair process can be complicated by the appearance of new defects resulting from a bad rectifier.

3) Sometimes, when dropped, the contacts of some parts and components come off. During inspection, try to reinstall several times those elements of the device that can be reinstalled. (SIM card, battery, memory card). By reinstalling them again, you can restore lost contacts.

4) Under mechanical stress, parts of the SIM reader may be deformed. This malfunction will be eliminated at the service center by replacing the component.

5) In addition to a fall, a humid or aggressive environment can affect the failure of operation. Vapors of water, fats, acids, alkalis can cause active corrosion of SIM card elements. Elimination is possible by degreasing or cleaning with abrasive. It is better to entrust this operation to professionals so as not to damage delicate structures.

6) Does HTC one V, X, S, dual sim, mini freeze, turn off or not turn on? If your phone stops working and only the HTC brand name appears on the screen, you can (select your phone model in the “Hard Reset” section of our website) do a flashing. These operations return the phone to factory settings, remove all your applications and files, you will have to reinstall the necessary tasks, but the phone will start working as usual.

7) Sometimes they try to hold the power button for 10 seconds. Or the second option is to increase the volume + power button, hold it until it reboots. This restores the operation of the smartphone. Of course, it all depends on the nature of the damage, and the connection may not be restored. In this case, you will have to use the services of a service center.

To restore the operating parameters of your smartphone, the article “” may be useful.

The article contains extensive, deep and complete information on resolving such issues. Advice from a professional can be helpful and educational. By following these methods, you can achieve positive dynamics in restoring the functions of your gadget.

Reasons for not being included

Low battery problem

What adds difficulties?

Today, when buying a phone, you cannot be 100% sure that it will work without various problems during the agreed warranty period.

Therefore, you need to be prepared for a variety of incidents. This could be a sudden reboot of the device, a stoppage of charging, or even a regular shutdown of the smartphone.

The last incident can occur in all modern models; unfortunately, phones from HTC are not free from this. Further in the article we will try to determine why the device does not want to show signs of life, and we will also try to determine ways to solve this problem.

Reasons for not being included

In fact, there are a decent number of reasons why HTC does not turn on:

Low battery problem

If your smartphone turns off and won’t turn on due to a low battery, you can breathe easy. Nothing serious happened. To solve the problem, you just need to start charging your phone. If after connecting the charger there are no signs of life on the smartphone, then do not despair.

There are times when the connection between the contacts of the phone and the battery simply disappears. To solve the problem, you need to remove the battery from the device and then insert it back. The problem will be solved.

Lost connection between the power button and the phone

Such an incident can also arise while working with a smartphone. All devices, and HTC is no exception, make phones with small gaps between the button and the hole for it. This is provided so that you can conveniently turn the device on and off.

The process of working with the device can take place under different conditions, so various particles of dust, sand, etc. can get into this small gap. In this regard, the operation of the button itself is disrupted and it does not respond to presses. Therefore, the smartphone may not turn on.

To solve this problem, it is better to seek help from a specialized service center. If you wish, of course, you can clean the button yourself with alcohol, but there is a risk that after this the smartphone will not work much better.

Internal memory malfunction

As a rule, when there are problems with the internal memory, and all other microchips and contacts are working properly, then after the device vibrates 7 times, it simply shows no signs of life. In this case, it is better not to go inside the phone yourself to find the source of the problem, but it is better to immediately seek help from experts.

As preliminary steps before going to the service center, you can do the following:

If these actions do not bring the desired effect, then only a specialist can help.

The operating system does not load

This can also be one of the tasks if the device is turned off and does not turn on again.

There are several ways to solve this problem:

1. try to solve it by manually flashing the smartphone. As a rule, the power-on problem occurs after an unsuccessful update of the operating system, which must be reinstalled. This can be done using a personal computer. It is better to install already verified firmware versions to avoid similar difficulties;
2. contact the company's service center. The center’s specialists always have only proven methods for solving such problems, and they will be able to install a new working operating system on your smartphone without any problems.

The difficulty with the operating system is not the most noticeable, and therefore help in solving it will not cost a lot of money.

Microcircuits or battery are faulty

It's very easy to check that the HTC won't turn on due to the battery's fault. To do this, you need to open the back panel of the device and see what condition the battery is in. If it is swollen or liquid stains are visible on its surface, it is necessary to urgently replace it. The cost of this item is not very high

The burning of one of the microcircuits can be much more noticeable for your wallet. Then you will not be able to solve this issue yourself.

The only option is to go to a service center for specialist help. Depending on the complexity of the work and the rarity of the chip, the price for repairs can cost up to a third of the cost of the smartphone itself.

How to behave if HTC does not turn on

Surely you are familiar with the situation when you start to panic when your smartphone does not turn on. The first thing you do is knock on it in the hope that this way you can revive it. But, of course, this doesn’t help at all.

So what should you do if the device suddenly turns off and shows no signs of life?

What adds difficulties?

Video: HTC Nexus One PB99100 does not turn on

Of course, a switched off phone is always a problem, regardless of whether it is expensive or ultra-budget. But given the characteristics of some models, it is extremely difficult to independently verify the cause of the incident.

We are talking about HTC models that are manufactured in such a way that the battery and everything else are non-removable. In this regard, even a small problem with the battery can result in a completely major incident.

Therefore, you should not go inside your device if the simplest steps to solve the problem do not help. It is better to immediately seek qualified help from the HTC service center employees.

The article is devoted to a common problem - HTC phone does not turn on. The main reasons for this, as well as possible solutions, are considered.

HTC Desire 516 Dual Sim is a smartphone that, like many other Android devices, can be flashed in several ways. Reinstalling system software is a need that does not arise very rarely for owners of the model in question. Such manipulations, if performed correctly and successfully, allow you to somewhat “refresh” the device in software terms, as well as restore functionality lost as a result of failures and errors.

Responsibility for the result of manipulations with the device lies solely with the user who carries them out. All the actions described below are performed by the smartphone owner at his own peril and risk!

Preparatory procedures preceding the actual process of transferring files to device partitions can take quite a long time, but it is highly recommended to carry them out in advance. Especially in the case of the HTC Desire 516 Dual Sim - the model quite often creates problems for its users in the process of manipulating the system software.

Drivers

Installing drivers for pairing the device and software tools for firmware is usually not difficult. You just need to follow the instructions for Qualcomm devices from the article:

Just in case, an archive with drivers for manual installation is always available for download at the following link:

Backup

Due to the possible need to restore the smartphone software, as well as the mandatory deletion of user data from the device during the software installation process, you need to save all valuable information contained in the phone’s memory in a safe place. And it is also highly recommended to create a backup of all partitions using ADB Run. Instructions can be found in the material at the link:

Since the device in question is applicable to several methods of installing software, which differ quite significantly from each other, links to downloading the necessary programs and files will be posted in the description of the methods. Before proceeding directly with the instructions, it is recommended that you familiarize yourself with all the steps that will have to be carried out, as well as download all the necessary files.

Firmware

Depending on the state of the device, as well as the goals set by the user performing the firmware, the method of carrying out the procedure is selected. The methods described below are arranged in order from simple to more complex.

Method 1: MicroSD + Factory Recovery Environment

The first method by which you can try to install Android on HTC Desire 516 is to use the capabilities of the “native” recovery environment provided by the manufacturer. This method is considered official, which means it is relatively safe and easy to implement. You can download the software package for installation according to the instructions below using the link:

As a result of completing the steps below, we get a smartphone with the official firmware installed, designed for the European version.

There is no Russian language in the package! The Russification of the interface will be discussed in the additional step of the instructions below.

Additionally: Russification

To Russify the European version of the OS, you can use the Android application Morelocale 2. The program is available on Google Play.

Method 2: ADB Run

The result of following the instructions below will be a smartphone with the official firmware version 1.10.708.001 (the latest available for the model) containing the Russian language. You can download the archive with the firmware from the link:

1. Download and unpack the archive with the firmware.



2. The folder obtained as a result of unpacking contains a multi-volume archive containing the most important image for installation - "System". It also needs to be extracted into the directory with the rest of the image files.



3. Install ADB Run.



4. Open in Explorer the directory with ADB Run, which is located along the path C:/adb, and then go to the folder "img".



5. Copying files boot.img, system.img, recovery.img, obtained as a result of unpacking the firmware, into folders with appropriate names contained in the directory C:/adb/img/ (that is, the file boot.img- to the folder C:\adb\img\boot and so on).



6. Writing the three above file images to the corresponding sections of the HTC Desire 516 flash memory can be considered a full installation of the system. In normal cases, it is not necessary to install the remaining image files, but if there is such a need, copy them to the C:\adb\img\all folder.



7. Enable USB debugging and connect the device to the PC.



8. We launch Adb Run and use it to reboot the device into mode "Fastboot". To do this, first select item 4 "Reboot Devices" in the main menu of the application,

   

   and then enter the number 3 from the keyboard - item "Reboot Bootloader". Click "Enter".



9. The smartphone will reboot to the state "Download", what does the loading screensaver frozen on the screen indicate? "HTC" on a white background.



10. In ADB Run, press any key, and then return to the main menu of the program - item "10 – Back to Menu".

    

    Choose "5-Fastboot".

    

11. The next window is a menu for selecting a memory partition into which the image file will be transferred from the corresponding folder in the C:\adb\img directory.

    

12. Optional but recommended procedure. We clean the partitions that we are going to write, as well as the partition "Data". Choose "e - Clear Partitions (erase)".

    

    And then, one by one, we go to the points corresponding to the names of the sections:

    

    
    

    

    "Modem" And "Splash1" NO NEED to wash!

13. We return to the image selection menu and write down the sections.

We transfer the image files in a manner similar to the previous step of the instructions "Recovery"

And "System" to HTC Desire 516 memory.

Image "System" in essence, it is the Android OS, which is installed in the device in question. This section is the largest in volume and therefore its rewriting takes quite a long time. The process cannot be interrupted!

If there is a need to flash the remaining partitions and the corresponding image files are copied to the C:\adb\img\all directory, to install them you need to select the item "1 - Firmware All Partitions" in the selection menu "Fastboot menu".

And wait for the process to complete.

After finishing recording the last image, select in the request screen "Reboot device normal Mode (N)" by entering from the keyboard "N" and pressing "Enter".

This will lead to the smartphone rebooting, a long startup time, and ultimately the HTC Desire 516 initial setup screen will appear.

Method 3: Fastboot

If the method of flashing each partition of the HTC Desire 516 memory separately seems too complicated or time-consuming, you can use one of the Fastboot commands, which allows you to write the main part of the system without, in some cases, unnecessary actions on the part of the user.

We check that the smartphone and PC are paired correctly. On the command line we send the command:
fastboot devices

The system response should be the serial number 0123456789ABCDEF and the inscription "fastboot".

To avoid errors when performing the following steps, we indicate to Fastboot the location of the images by entering the command: set ANDROID_PRODUCT_OUT=c:\directory_name_with_fastboot

To start flashing, enter the command: fastboot flashall. Click "Enter" and watch the execution process.

Upon completion of the procedure, the partitions will be overwritten "Boot", "Recovery" And "System", and the device will reboot into Android automatically.

If there is a need to overwrite other sections of the HTC Desire 516 memory in this way, place the necessary image files in the fastboot folder, and then use the commands with the following syntax:

fastboot flash partition name image file name.img

For example, let's write the section "modem". By the way, for the device in question, writing the “modem” section is a procedure that may be necessary after restoring the smartphone from a non-working state, if as a result the smartphone works as it should, but there is no connection.

Copy the required image(s) to the directory with Fastboot (1) and send the command(s) (2):
fastboot flash modem modem.img

Upon completion of work, restart HTC Desire 516 from the command line: fastboot reboot

Method 4: Custom firmware

The HTC Desire 516 model has not gained wide popularity due to its hardware and software features, so, unfortunately, it is impossible to say that there are many modified firmware for the device.

One of the ways to transform and refresh the device in question in software terms is to install an Android shell modified by one of the users of the device, called Lolifox. You can download all the necessary files that you will need when performing the steps in the instructions below using the links below.

In the proposed solution, its author has done serious work in terms of changing the OS interface (looks like Android 5.0), deodexed the firmware, removed unnecessary applications from HTC and Google, and also added an item to the settings that allows you to control startup applications. In general, the custom works quickly and stably.

Installing custom recovery.

To install a modified OS, you will need custom recovery capabilities. We will use ClockworkMod Recovery (CWM), although there is also a TWRP port for the device, which you can download. In general, installation in D516 and work with different custom recoveries are similar.

Installing custom Lolifox

Once the modified recovery is installed in the HTC Desire 516, installing custom software is not difficult. It is enough to follow the instructions from the lesson at the link below, which involve installing zip packages.

Let us dwell only on a few points recommended for implementation for the model under consideration.

Method 5: Recovering inoperative HTC Desire 516

When operating and flashing any Android device, trouble can occur - as a result of various failures and errors, the device freezes at a certain stage, stops turning on, endlessly reboots, etc. Among users, the device in this state was called “brick”. The following may be a way out of the situation.

The recovery methodology (“unscrapping”) of HTC Desire 516 Dual Sim involves performing quite a large number of actions and using several tools. We carefully follow the following instructions step by step.

Switching the smartphone to “Qualcomm HS-USB QDLoader9008” mode

1. Download and unpack the archive with all the necessary files and tools for recovery.

   The result of unpacking should be the following:



2. To restore, you need to put the smartphone into a special emergency mode QDLoader 9006. Remove the cover covering the battery.
3. We remove the battery, SIM cards and memory card. Then unscrew 11 screws:



4. Carefully remove the part of the case covering the motherboard of the device.



5. On the motherboard we find two contacts marked "GND" And "DP". Subsequently, they will need to be bridged before connecting the device to the PC.



6. We install the QPST software package from the folder of the same name, obtained as a result of unpacking the archive using the link above.



7. Go to the directory with QPST (C:\Program Files\Qualcomm\QPST\bin\) and run the file QPSTConfig.exe



8. Opening "Device Manager", prepare a cable connected to the USB port of the PC. Closing the contacts "GND" And "DP" on the D516 motherboard and, without opening them, insert the cable into the MicroUSB connector of the phone.



9. Remove the jumper and look out the window "Device Manager". If everything is done correctly, the device will be detected as "Qualcomm HS-USB QDLoader9008."



10. Go to QPSTConfig and make sure that the device is detected correctly, as in the screenshot below. Don't close QPSTConfig!



11. Open the folder with the QPST files again and run the file emmcswdownload.exe on behalf of the Administrator.



12. Add the following files to the fields of the window that opens:
    



13. Click the buttons and indicate the location of the files to the program:
    



14. We check that all fields are filled out correctly (should be like in the screenshot below) and click "Download".



15. As a result of the operation, HTC Desire 516 Dual Sim will be switched to a mode that is suitable for writing a dump to memory. In Device Manager, the device should be identified as . If, after manipulations via QPST, the device is determined to be somehow different, manually install the drivers from the folder "Qualcomm_USB_Drivers_Windows".

Additionally

In the event that errors occur during QPST operation and the smartphone switches to "Qualcomm HS-USB Diagnostics9006" We can’t do it, we try to perform this manipulation through the MiFlash program. You can download the firmware version suitable for manipulating HTC Desire 516 Dual Sim, as well as the necessary files, from the link:

1. Unpack the archive and install MiFlash.



2. We follow steps 8-9 described above in the instructions, that is, we connect the device to the computer in a state where it is detected in Device Manager as "Qualcomm HS-USB QDLoader9008".



3. Launch MiFlash.



4. Press the button "Browse" in the program and indicate the path to the directory "files_for_miflash", located in the folder obtained as a result of unpacking the archive downloaded from the link above.



5. Click "Refresh", which will lead to the device being detected by the program.



6. Calling up the list of button options "Browse" by clicking on the triangle image next to the last one
   
   

   and selecting from the menu that opens "Advanced...".



7. In the window "Advanced" using buttons "Browse" add files from the folder to the fields "files_for_miflash" in the following way:
   

   After all files have been added, click "OK".



8. Next, you will need to be careful. Making the window visible "Device Manager".
9. Press the button "Flash" in the flasher and observe the COM ports section in "Dispatcher".



10. Immediately after the moment when the smartphone is detected as "Qualcomm HS-USB Diagnostics9006", we close MiFlash without waiting for the end of the manipulations in the program, and move on to the next stage of restoring HTC Desire 516.

File system recovery

Thus, having studied how to install system software in the HTC Desire 516 Dual Sim, the user gains full control over the device and can quite easily restore the device’s functionality if necessary, as well as give the smartphone a “second life” using customization.

In our world, people can no longer imagine life without a smartphone. He became an extension of our hand. For most people, the breakdown of their favorite gadget will cause panic and hysteria. This, of course, is not very good, but you have to put up with it. Modern mobile devices are very capricious things. Sometimes they behave unpredictably. In order not to be left without communication, you need to know what to do with the device if it suddenly “kicks up” and does not react in any way to the user’s actions. The most common problem with gadgets is that the phone does not turn on beyond the splash screen. What can you do to revive your “pet”? Let's try to answer this.

Possible causes of failure

There are several reasons for this behavior of the smartphone. And depending on them, the decision on repairs will be made. The first (and most common) reason that the phone does not turn on beyond the Android screensaver is a failure during the installation of an operating system update. This happens because the Android OS is not very stable. That's not so bad. However, the same result can occur after the device is dropped from a considerable height. This is much worse.

Also common reasons may be a malfunction of the battery, charger, or the gadget charging connector itself. Now let's look at the screensaver. In most cases, you can fix everything yourself. Fatal breakdowns are extremely rare. But at the initial stage, the main thing is to correctly diagnose the problem in order to avoid making mistakes in the future.

System failure

This is the safest thing ever. If the operating system crashes, you need to go into recovery mode and reset the factory settings with clearing the cache. Be careful! After this procedure, there will be no third-party applications installed by the user. You can enter recovery by simultaneously pressing the volume up button and the power button. True, there may be different combinations for different models of devices. Then you need to go to the point Wipe data and factory reset and confirm your choice. Then you need to check the box Reboot system now. after this the phone will reboot. If everything is fine, then the reason that the phone does not turn on beyond the Lenovo screensaver was precisely a system failure.

Sometimes resetting to factory settings doesn't help. Then there is another option. You just need to reflash the phone. It's not that hard to do. The Internet is full of instructions for each specific smartphone. And at any adequate forum they will be happy to help you implement your plans. Don't lose heart.

If the reason is the battery and charging

You can check this very simply. It is enough to find a similar battery and a similar charger somewhere. If, after replacing all the components, you do not see any changes, then the reason that the HTC phone does not turn on beyond the splash screen is much deeper than you thought. There are only two options: damage to the charging socket or the board itself.

Dealing with a faulty battery or a “glitched” charger is easy. These are not particularly expensive smartphone components. They can simply be replaced with new ones. The problem with the hardware board will be much more noticeable. Here (in most cases) you can’t do without a visit to the workshop. Sometimes you have to pay a very significant amount for repairs.

If the reason is in the board and hardware

It is very difficult to do something about this on your own. You need to have some knowledge of radio electronics and own the appropriate tools. If you have all this, then you can easily solve the problem. But if the phone does not turn on beyond the screensaver due to a faulty board, and you do not understand anything about this matter, then it is better to take the gadget to a service center. Because by arranging repairs on your own, you risk turning your device into a dead brick.

You can try to find a familiar specialist who repairs smartphone hardware and save on repairs. But it is unlikely that he will resuscitate your device for free. Only if this is a very good friend. But, in any case, you will have to spend money on the Magarych. And it is unknown how much this will cost.

Summary

Now you know the main reasons behind the screen saver. There are ways to combat this unpleasant phenomenon. Unless it's a hardware problem. But, as statistics show, in most cases this problem is caused by a failure of the operating system. And eliminating this annoying misunderstanding is very simple with the help of a few buttons.

• Block diagnostics of the HTC Desire 516 phone

  During block diagnostics, it is determined which specific element (Case, protective glass, sensor, printed circuit board, connectors, speakers, microphone, antenna, battery) has failed.

  Algorithm for block diagnostics of a phone:

  HTC Desire 516 won't charge; Checking h order, if the phone charge is intact, otherwise: Let's check if it's working: If all of the above does not suit you, then you will need or.
  HTC Desire 516 Won't turn on or won't boot; Checking P I'll lose charge, if the phone battery is charged then: We check and see if it’s correct power button on the phone; If at this stage we haven’t found the cause of the breakdown, remember - if the phone was filled with liquid, or the phone fell and stopped turning on, it will most likely be needed.
  HTC Desire 516 The phone does not connect to the network or does not see the SIM card; Checking whether the phone detects another SIM card, if it detects then: Checking Phone settings, if the settings are correct then: Required.
  HTC Desire 516 Does not see the SD card, does not detect the flash drive; Checking phone flash card, if correct then: Checking flash drive connector on the phone, if it is also working, then: You need to either repair the phone's motherboard.
  HTC Desire 516 Does not charge via USB; Checking usb cable, if the cable is ok then: We check if it is ok then: You need or.
  HTC Desire 516 Not updated; Checking settings, if the settings are correct, then: Checking Internet connection, if the connection is stable, then you need a phone.
  HTC Desire 516 Doesn't connect to Wifi; Checking Phone settings, if the settings are correct then: Checking WiFi adapter telephone if ok required .
  HTC Desire 516 Can't see the computer; Checking connection cable to the computer if the cable is intact then: Checking drivers phone on the computer, if the correct drivers are installed, then: Phone required.
  HTC Desire 516 turns on, but there is no image on the screen or it is distorted: Checking for availability physical damage screen, if not then: Checking display cable phone, if the cable is intact, then: The phone needs repair or repair.
  The sensor on the HTC Desire 516 stopped working: We check the integrity for damage, if it is intact then: Checking touch display cable, if intact then: Phone required, or controller repair display.
  The microphone does not work on HTC Desire 516; Checking Phone settings, if the settings are correct then: We check if it is intact: Let's check if it works microphone controller on the phone if it works then: Required.

• Replacing the touch glass of the HTC Desire 516 phone

  Replacing the protective glass of the HTC Desire 516 phone.

  The display of the HTC Desire 516 mobile phone is protected from damage by a special protective glass. If glass it will crack or chip as a result of a fall, then display your phone is at risk: it may also be damaged, and the image may become “blurry” or the Desire 516 phone will stop displaying altogether. If dust or small debris gets behind the glass, it will further damage it. Our service center specialists can replace the protective glass of the HTC Desire 516 phone to prevent possible .

• Component diagnostics of the HTC Desire 516 phone

  Component Diagnostics of the HTC Desire 516 phone is a diagnostic of the phone's system board. This type diagnostics, being more complex, is the identification of damaged element on the board of the HTC Desire 516 phone. Repair device after this diagnostic involves resoldering the microcircuits and replacing faulty elements on the board of the HTC Desire 516 phone.

• Firmware for HTC Desire 516 phone

  Every year, phones perform more and more functions, and are already mini-computers. And for stable operation a well-functioning operating system is required.

  Phone firmware may be required for most problems - from the fact that the phone has stopped detecting the computer to the fact that the phone's display has stopped working.

  Cases when flashing the HTC Desire 516 smartphone is required:

  • MIC is not working on HTC Desire 516;
  • The sensor on the HTC Desire 516 phone stopped working:
  • HTC Desire 516 turns on but no image on screen or is it corrupted by the phone:
  • HTC Desire 516 does not see the computer;
  • HTC Desire 516 does not connect to Wifi;
  • HTC Desire 516 is not updated;
  • HTC Desire 516 won't turn on or does not load;
  • The HTC Desire 516 phone does not connect to the network or doesn't see the SIM card;
  • HTC Desire 516 does not see the SD card, does not detect the flash drive;
  • HTC Desire 516 not charging via usb.

  In most cases, problems with the HTC Desire 516 phone arise due to the firmware or its incorrect update. Due to a glitch in the phone's firmware, the settings are lost, or the drivers of some controllers fail, and some functions may simply stop working.